Non woven machinery adopts active cotton feeding equipment, which is safe and easy to operate

In the past, the textile industry was recognized as an industry requiring a lot of manpower, but with the increasing use of cloth in our life, the textile industry must start the development of technology, and the use of mechanized equipment has become an inevitable trend. There are many steps and processes in textile manufacturing. Now with the use of mechanized equipment, the efficiency has been greatly improved, and the quality of products has been guaranteed. Among them, non-woven machinery has played an important role. Let's take a look at the introduction of non-woven machinery.

Nonwoven machinery manufacturers believe that the so-called spinning cotton production line is to mix the chemical fiber bonding fiber with low melting point into the cotton sheet of pure cotton or chemical fiber cotton, and heat the low melting point bonding fiber to cross link with other fibers after melting, so as to bond cotton and other chemical fiber cotton together, Hot melt quilt is made of hot melt cotton wadding according to quilt specifications.

It is used for evenly loosening two-dimensional and three-dimensional screw cotton, PP cotton, doll cotton and ordinary hollow cotton. It only needs to be loosened at one time. It is suitable for toy factories, sofa factories, bedding factories and home textile and garment factories; It can also loosen old wool, sweater, old quilt, etc. Non woven mechanical equipment

1. Use the large roller and several small rollers to rotate and bite, and run at a low speed of 1400 rpm to comb and loosen the raw cotton for up to 10000 times without damaging the raw cotton;

2. Active cotton feeding equipment is selected, which has the advantages of safe and simple operation, long continuous operation time and low repair rate;

3. The seamless steel pipe main roller is combined with several small rollers, slotted and wound with the imported special rack. The main roller has been subject to high-speed electronic dynamic balance, and the left-right error is only 0.1-1g, which ensures that the machine runs more smoothly without sensation, and the overall service life of the machine is longer and the maintenance cost is lower. Non woven mechanical equipment

mission:

(1) Cotton opening: loosen the tightly pressed raw cotton into smaller cotton blocks or bundles to facilitate the smooth progress of mixing and impurity removal;

(2) Cotton cleaning: remove most impurities, defects and short fibers that are not suitable for spinning in raw cotton.

(3) Cotton blending: mix raw cotton of different components sufficiently and evenly to facilitate the stability of cotton yarn quality.

(4) Roll forming: make cotton rolls with certain weight, length, uniform thickness and good shape.

Non woven fabric machinery is a kind of mechanized equipment widely used in the textile industry, mainly because more and more non-woven fabrics are used in many industries. In order to meet the market demand, it is inevitable for manufacturers to use non-woven fabric machinery. In addition, the non-woven fabric machinery itself has excellent performance, Therefore, non-woven machinery will gradually be favored and used by more manufacturers in the industry. If you want to know more about non-woven machinery, welcome to consult.